First Article Inspection: What a CMM Report Must Show
A CMM first article report for CNC prototypes: instrument choice by tolerance, datum alignment, true position, and the traps that fake a pas...
2026-11-06
Die Casting Die Spray: Thermal Balance That Works
Why die spray and die face temperature decide porosity, soldering and cold shuts in die casting, with settings that repeat shot to shot.
2026-11-06
Low-Volume Production: Scale From 10 to 1,000 Parts
A process selection guide for low-volume production: where CNC machining, vacuum casting, soft tooling and die casting make sense as volume ...
2026-11-05
Die Casting Shot Speed and Intensification: A Guide
How slow shot, fast shot and intensification pressure control die casting quality, and the settings behind flash, porosity and cold shuts.
2026-11-05
5-Axis Workholding: How to Fixture Complex CNC Parts
Fixture height, collision zones, zero-point pallets and soft jaws: how to hold complex parts for 5-axis CNC machining without crashes.
2026-11-04
Hot Runner Valve Gates and Zone Control: A Prototype Guide
How valve gates, sequential pin timing and manifold zone control fix weld lines, drooling and vestige in prototype injection molding.
2026-11-04
CNC Machining Plastics: How It Differs From Metal
Machined plastic parts follow different rules than metal: deflection, jaw dents, tool sharpness and moisture movement. Practical cutting rul...
2026-11-03
Hot Runner vs Cold Runner: A Prototype Mold Decision
Cold runner or hot runner for your prototype mold? Compare cycle time, tooling cost, materials and gate vestige with realistic numbers and d...
2026-11-03
Drying Plastic Before Injection Molding: A Moisture Guide
Silver streaks and brittle PC parts usually trace back to wet resin. Drying temperatures, times, and dew point targets for ABS, PC, PA, and ...
2026-11-02
Die Casting Die Life: Heat Checking and Shot Count
What limits aluminum die casting die life? Heat checking, soldering, and shot counts explained with practical numbers for prototype and prod...
2026-11-02
